Working with a computer involves installing and running numerous programs. The user installs all applications manually and launches them on demand.
Sometimes, in the process of work, incomprehensible errors come out. An uninformed user cannot immediately determine what this error is and what is the reason for its appearance.
One of the fairly common error codes is 0xc000012f. Someone has already encountered it and knows how to act in this situation. For others, the following information and instructions will be extremely useful.
Contents
Introducing the bug
Before talking about the status of the error 0xc000012f, you need to understand what actually happened and what problem the corresponding code is talking about.
In general, the process of installing and running programs on Windows 10 computers is standard and mundane. In most cases, no difficulties or problems arise in this case.
But it happens differently. When the dialog box that says Bad Image pops up, and also displays the code error 0xc000012f. This is common on Windows 10. Also in the window with an error it is written that the program is not intended to run, or it contains an error.
An interesting situation arises here. If an error with the code 0xc000012f appears when starting a game or application and the software indicates the reason in the dialog box, then the user starts looking for the reason in the software.
This is not entirely correct. After all, such a problem can arise in various situations. Even if it’s software from official sites. That is, there should be no potential errors, but they are. And the software is not the only one to blame.
What are the reasons for the error
If an error like 0xc000012f appears on the screen of a computer or laptop when launching an application, the dialog box, oddly enough, cannot be 100% trusted.
Yes, there is a possibility that an unlicensed software installation was performed. And it has a lot of bugs and other problems. Then the appearance of Bad Image is quite natural. But that doesn’t happen often. The likelihood is negligible.
More real reasons that the system writes about the error status with the code 0xc000012f when the game or program starts are:
- a large amount of temporary files has accumulated on the hard disk;
- the failure occurred due to the influence of malicious software;
- system files were damaged;
- the impact of residual data after Windows 10 updates;
- crash from the computer libraries.
As you can see, there are several potential reasons. Because of this, it will take some time to fix the problem. It is important to adhere to the instructions clearly.
How to fix the error
Now to the main question about how to fix the error 0xc000012f correctly.
It is immediately important to note here that it is possible to eliminate the problem due to which it is impossible to launch or install the program, even without a clear knowledge of the cause of its occurrence.
To get the result, you need to perform certain actions according to the algorithm below.
It is difficult to say at once which solution will get rid of the problem in the form of error 0xc000012f on computers with the operating system Windows 10. By following the recommendations step by step, in the end it will become clear what was the reason. But the most important thing is that the problem will go away and you can continue to work calmly with games, applications and other software.
Loading a different software version
Many are interested in what to do in the first place to check the causes and state of such an unpleasant error as 0xc000012f.
And first, you always need to exclude the possibility that the problem was caused by the program itself.
If an error pops up during installation, then look for an alternative version of the same software. It is better to do this through the official developer sites.
Consider compatibility issues. It is possible that your computer or operating system simply does not support work with the installed software.
If checking by installing an alternative version showed that the reason is not in the program, then you can proceed to more active actions.
Garbage cleaning
Sometimes the answer to the question of how to remove the annoying error 0xc000012f on your Windows 10 computer is on the surface. It is enough just to clean your PC from junk files.
If it’s not about the program, then you should start by ridding your computer of unnecessary files. This is the cache and the remnants of software that was deleted long ago.
Generally, cleaning can be done manually. But then each file will have to be searched for and deleted separately. Therefore, it’s easier to arm yourself with the built-in tools that Windows 10 offers.
Here’s what you can do:
- start explorer;
- move the cursor to the system disk;
- right-click;
- select “Properties”;
- go to the “General” subsection;
- then click on “Disk Cleanup”;
- wait for the completion of the process analysis;
- confirm deletion of unnecessary files.
When the deletion is complete, a window will appear with information about how much space has been cleared.
Now you need to reboot the system and try again to open the program that caused the error.
Besides the standard cleaning tool, also use third-party but effective programs. Such as CCleaner. Moreover, their application can be combined. Check with the built-in tool first and then with another program.
Viral analysis
The presence of malicious files greatly affects the state and operation of the operating system. Viruses can cause a variety of failures. And the appearance of the code in question is no exception. In such a situation, it will not be difficult to remove the error code 0xc000012f that appears on a PC or laptop with Windows 10 on board.
The problem with viruses is that sometimes they sit in the system for a long time, but do not manifest themselves in any way. When faced with such an error, perform a comprehensive system scan with antivirus software. These can be full-fledged antiviruses, or curing utilities.
Since the most effective versions of programs are paid, a good solution would be to use the built-in utility in the person of Defender. For this you need:
- open tray on the taskbar;
- click on the image in the form of a white shield;
- open the section with protection against viruses and threats;
- start the verification process;
- wait for the analysis to complete.
The application will independently delete files that are suspicious and potentially dangerous.
It is also worth performing a full scan with the same utility. It’s just that it usually takes more than one hour.
System file recovery
There is another potential cause for the error. These are corrupted system files. Again, viruses may be the reason.
If the virus is removed, the file will not be restored anyway. You need to do this yourself.
In this case, the following instruction is offered:
- open a team building;
- register the sfc / scannow command in it;
- wait for the process to complete;
- now enter the command as DISM / Online / cleanup-image / RestoreHealth;
- wait for the end of the check.
When the test is completed and all damaged system files are restored, you need to restart the device and check again if the application is now working.
If the error still pops up, then you will have to act further. Fortunately, solutions still exist.
Removing and reinstalling
If, under the influence of certain factors, including viruses, the program crashes. This usually happens because one or more files are being deleted. This happens by accident, or on purpose, so you can’t blame the operating system for everything.
When the error appears when starting the software, then it is worth trying the following:
- remove the installed problematic application;
- download the same software from the developer’s website;
- make sure that the computer, OS and software are compatible;
- install software.
Sometimes such a measure leads to a positive result.
But if the attempt is unsuccessful, do not despair. Move on.
Removing a cumulative update
There is another solution that can potentially help solve the problem with error code 0xc000012f. This is the removal of the cumulative update on Windows 10. It has its own code, namely KB2879017.
Do not be afraid. Nothing too complicated.
The user is required to:
- open “Start”;
- select the “Parameters” section;
- go to the “Security and Updates” category;
- then click on the line with the update log viewing;
- now click on the “Remove updates” option;
- you need to find the package with the code specified earlier and move the mouse cursor to it;
- using the right mouse button to open the context menu, delete the package.
Just keep in mind that for the changes to take effect after the uninstallation is complete, you must reboot the PC. Check again if the application starts. If not, then go to the next method.
Re-registering Libraries
Another potential cause of error 0xc000012f is problems with the system library on Windows 10. Here you will have to re-register the parameters.
This can be done according to the following instructions:
- run the command line in any convenient way;
- register the regsvr32.exe command;
- then specify the request C: Windows system32 MSVCP140.dll;
- give confirmation to perform the specified operation.
Literally a few seconds will pass, and the new library will be registered.
It cannot be ruled out that after the performed manipulations, the problematic game or application will start working stably, and the error will disappear.
Reinstall or update the Framework
In some cases, the error in question is the result of an incompatibility.
NET Framework version 4.6 is standard on Windows 10 computers. But some applications may use the 3.5 version for their work. In this case, you will need to download an alternative update package to your PC.
Use only the official website of the Windows developer, i.e. Microsoft. Then it remains to install the package, restart the PC and make another attempt to start the program.
Update for Visual C ++
Additionally, it will not be superfluous to download the Visual Studio components.
To do this, you need to open the official Microsoft website and download the current up-to-date version of Visual C ++. Then you need to install it on your PC.
And by tradition, check whether the problem program will work.
Recovery point
The last resort in this situation is the use of restore points.
If the user noticed that the program started normally before, without problems and the error did not get out, then it makes sense to try to roll back the operating system to the state for that period.
Of course, to rollback, you must first create the appropriate restore points.
Have you ever encountered error 0xc000012f? What programs or applications was it blocking? What caused this malfunction? What method ultimately helped solve the problem?
Share personal experiences and observations.
Subscribe, leave comments and ask relevant questions!