It is difficult to come to terms with the forced situation when the smartphone is suddenly discharged, and there is not a single possibility to charge the battery.
It is terribly difficult for a modern person to be cut off from the whole world, to be left without a means of communication, so it is not surprising that when going on a trip, on long trips, the owners of modern gadgets stock up on additional chargers that ensure the correct operation of devices.
However, it is not only a discharged battery that can bring unpleasant surprises. The operating system of the smartphone also competes with this, often accompanied by various failures, as a result of which even a charged device refuses to perform some actions.
Many users are not satisfied with the standard ZTE firmware and they decide to reflash their smartphone
Faced with such a problem, most users decide to flash their ZTE smartphone in order to safely get rid of the annoying problems.
Contents
Why is there a need for firmware
There are several circumstances forcing the owners of modern devices to invade the “inner world” of their electronic friend.
Armed with information about the reasons that can provoke system failures, it is much easier for smartphone owners to warn the gadget against sad consequences or recognize them in time and take actions that eliminate all problems that get in the way.
Reasons for Operational Failure
It may happen that your favorite ZTE smartphone has stopped working. The reason may lie in its mechanical damage, when it was treated carelessly, often dropped on the floor, moisture got on it. It is also quite possible that the device components fail.
Unfortunately, it is impossible to solve the problem of mechanical damage to the smartphone at home, so it is correct to take it to a service center. Qualified craftsmen will carry out effective “resuscitation” measures and breathe new “life” into the gadget.
Another reason that at some stage the smartphone starts to reboot and shut down by itself is a failure of the operating system. You can solve this problem at home, but only with appropriate preparation.
It is very important to get ready, since the ZTE v815w firmware itself may turn out to be unsuccessful if it was installed accompanied by gross errors.
So, those who have noticed the incorrect operation of the gadget, who decided to optimize the operation of the system by installing an updated version of the firmware, are interested in how to flash the ZTE v815w, about which positive responses have been widely circulated.
Flashing process
Many owners of modern gadgets will be able to flash a ZTE smartphone if they first receive a “portion” of useful information that allows them to thoroughly understand how to reflash a ZTE v815w.
In this case, you can take the risk and do everything yourself, saving financial resources, as well as increasing your level of knowledge of modern devices.
Firmware algorithm
Programmers periodically give users a variety of useful products that allow many operations to be carried out not only quickly, but also easily.
One of these software products is the CWM application, focused specifically on the process of installing the operating system for ZTE smartphones.
It is recommended to download and install this application in advance. Also, get information about your smartphone, since it is advisable to use a Gen 2 device for firmware.
Unfortunately, not all smartphones are accompanied by such an execution, you can also find variants where there is Gen 1. In this case, you have to take one additional step.
It is easy to find the CyanogenMod application on specialized forums, which can act as a successful assistant in translating the Gen 1 version to Gen 2.
First, turn off the phone, then simultaneously hold down the two keys “-” and “on”, after that the message “FTM” should appear on the screen. Only after that you need to connect your smartphone to your PC.
It remains to find the download_nochecksGen2 download file with the exe extension, run it, wait for the process to complete and make sure that the smartphone now has the desired Gen 2 performance.
Smartphone flashing starts with formatting the flash card. In some cases, you have to run the formatting process more than once. Unfortunately, sometimes there is no other option, how to replace the flash card, so you have to resort to such a replacement. This applies in most cases to cheap and too low quality flash cards.
Now onto the prepared flash card, feel free to copy the previously downloaded firmware. Do not forget to make sure that the computer helps to successfully identify the smartphone in the CWM application.
It’s so simple, just find the “Mount USB storage” parameter in the main menu, click on it, then copy the firmware file, and then click on another “Unmount” parameter.
The next stage involves a direct process during which the firmware is installed on a smartphone.
In Recovery, find the “Install zip from sdcard” parameter, click on it and follow all the recommendations that will be displayed on the screen. After completing the process, you need to restart your smartphone. The “Reboot system now” parameter will help you with this.
Now, after launching the smartphone, you can enjoy the work of your own smartphone, on which the new firmware is installed. This method of installing new firmware versions is only suitable for ZTE Blade smartphones.
So, the owner himself will be able to restore the performance of a smartphone that he does not want to say goodbye to and purchase a new device, if he values his device very much.
If the first attempt failed, the firmware was installed incorrectly, which is reflected in the low performance of the device, you can repeat the process.
Only this time it is imperative to show increased vigilance, as well as download the firmware version from trusted resources. It is not recommended to trust all sources that describe their offer with tempting phrases.
Along with them, you can download additional “gifts” in the form of malicious software that can seriously harm your smartphone.